Leave Your Message
8-94425685-2 TIMER; GLOW PLUG ISUZU

8-94425685-2 TIMER; GLOW PLUG ISUZU

  • Product Number: 8-94425685-2
  • Product Name: TIMER; GLOW PLUG
  • Engine Model:
  • Weight: 0.118KG

Compatible Machine Models:

product details

                                                

Description

Part Name TIMER; GLOW PLUG
Part Number 8-94425685-2
Reference Number 8981329420, 898132-9420, 8-98132-9420, 8-98132-942-0
8-97201331-0, 8972013310, 897201-3310, 8-97201-3310, 8-97201-331-0
Brand Name ISUZU
Place of Origin Japan
Delivery Time 1-3 work days
Packaging Type Cartons

  

1.jpg

 The Precision Controller for Optimal Pre-Glow Timing

The glow plug timer (also known as a warm-up timer or preheating control unit) is a smart electronic component that manages the exact duration and voltage supplied to the glow plugs during the engine start-up sequence. In systems like Isuzu's QOS II, this module calculates the required pre-heat time based on engine coolant temperature—extending the glow duration in freezing conditions and shortening it when the engine is warm to ensure perfect starting every time.

4.jpg

Intelligent Control with Multiple Protection Features

Equipped with advanced solid-state circuitry, the timer uses a microprocessor to execute precise heating intervals. It typically reduces battery voltage to a level suitable for sustained glow plug heating after the initial warm-up phase, preventing premature burnout. Integral thermal overload protection temporarily interrupts current if the heating element exceeds a preset temperature or if the supply voltage surges abnormally—a common safeguard in Isuzu's ultra-high-speed heating systems to prevent coil damage. Located on the left side of the engine in many Isuzu models, this module is a critical component of the preheating system, working alongside the glow plug relay and thermoswitch.

8-98132942-0.jpg

Emissions Compliance & Warranty Protection

A failing or non-genuine glow timer causes hard starting, extended cranking, rough idle, white smoke on cold mornings, and will trigger diagnostic trouble codes. In severe cases, erratic timing control can burn out glow plugs or drain the battery. Isuzu service procedures require the timer to be replaced if its output or timing calibration deviates from specification. Using an uncertified timer may void your Isuzu emissions warranty. Choose genuine to restore factory pre-heat logic and ensure reliable cold-starting performance.

.

The Ownership Of The Products Belongs To Guangzhou Qicheng Machinery Equipment Co., Ltd.